Search
Filters
Close

MSR Distribution regrets to inform all our California-based customers that MSR will no longer be accepting any ammunition and firearm orders for delivery to addresses in the State of California.

Notice: MSR Distribution is a wholesale distributor and does not sell to the general public. Please login for product pricing and availability, or learn how to become an MSR Dealer.

Sorry - this product is no longer available

CZ P-10 C 9MM, FDE,NS 15rd, Reversible Mag Catch

CZ P-10 C 9MM, FDE,NS 15rd, Reversible Mag Catch
SKU: CZ-P10-9MM-COMPACT-FDE-91532

The Flat Dark Earth version of the P-10 C.

One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly. 

Much more than just our take on the striker-fired pistol, the P-10 is decidedly CZ, from the way it feels to the way it shoots.

First order of business, ergonomics. Anyone who’s picked up a CZ 75 for the first time gets it — it just has to feel right in the hand. With the CZ grip angle, the P-10 avoids that ‘brick-in-the-hand’ feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Because it was.

Next up, trigger. So many striker-fired pistols do many things right, falling short when it comes time to pull the trigger. The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless.

Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt.

Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market.

It may have taken a while to come to market, but we feel the wait has been worth it. With CZ reliability, engineered ergonomics and a bevy of features both familiar and new, the P-10 is the complete package.

 

 

 

Product Name: CZ P-10 C FDE 9mm
SKU: 91532
MSRP: $519
Chambering: 9mm Luger
Magazine Capacity: 15+1
Frame: Fiber-reinforced polymer
Trigger Mech: Striker
Sights: Metal Night Sights
Barrel: Cold Hammer Forged
Barrel Length: 4.02 in
Height: 5.2 in
Width: 1.26 in
Weight: 26 oz
Overall Length: 7.3 in
Safety: Firing Pin Block Safety, Trigger Safety 

The Flat Dark Earth version of the P-10 C.

One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly. 

Much more than just our take on the striker-fired pistol, the P-10 is decidedly CZ, from the way it feels to the way it shoots.

First order of business, ergonomics. Anyone who’s picked up a CZ 75 for the first time gets it — it just has to feel right in the hand. With the CZ grip angle, the P-10 avoids that ‘brick-in-the-hand’ feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Because it was.

Next up, trigger. So many striker-fired pistols do many things right, falling short when it comes time to pull the trigger. The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless.

Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt.

Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market.

It may have taken a while to come to market, but we feel the wait has been worth it. With CZ reliability, engineered ergonomics and a bevy of features both familiar and new, the P-10 is the complete package.

 

 

 

Product Name: CZ P-10 C FDE 9mm
SKU: 91532
MSRP: $519
Chambering: 9mm Luger
Magazine Capacity: 15+1
Frame: Fiber-reinforced polymer
Trigger Mech: Striker
Sights: Metal Night Sights
Barrel: Cold Hammer Forged
Barrel Length: 4.02 in
Height: 5.2 in
Width: 1.26 in
Weight: 26 oz
Overall Length: 7.3 in
Safety: Firing Pin Block Safety, Trigger Safety 
Write your own review
  • Bad
  • Excellent

Question on how to purchase? Please see our registration information page.

California Proposition 65 Warning Symbol  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Or see our Terms & Conditions for more inforation.

banner